Six-Lobe Punch Press Dies Suppliers
Isixhobo: Iintsimbi zokufa zentsimbi zenziwe ngentsimbi ekumgangatho ophezulu okanye i-carbide.Ezi zixhobo zikhethwa ngenxa yobunzima bazo, ukuqina, kunye nokukwazi ukumelana nempembelelo ephindaphindiweyo.
Ubume kunye nobukhulu: I-Punch dies iza kwiimilo ezahlukeneyo kunye nobukhulu ngokuxhomekeke kumngxunya ofunekayo okanye imilo ekufuneka yenziwe.Imilo eqhelekileyo ibandakanya ingqukuva, isikwere, uxande, ihexagonal, okanye iimilo zesiko ezithe ngqo kwisicelo.
12x25mm: 25g/pc
14x25mm: 30g/pc
18x25mm: 50g/pc
23x25mm: 80g/pc
| Into | Ipharamitha |
| Indawo yeMvelaphi | eGuangdong, eTshayina |
| Igama lebrand | Nisun |
| Izinto eziphathekayo | Isinyithi esinesantya esiphezulu |
| Indlela yokuqhuba | Ukubetha nokucheba uMngundo |
| Isiqinisekiso | ISO9001:2015 |
| Inombolo yoMzekelo | Umgangatho okanye uLungiselelwe |
| I-header punch umgangatho | I-JIS, ANSI, DIN, ISO, BS, GB, kunye ne-NON-MGANGATHO, uyilo olulungiselelweyo |
| Ukunyamezelana | +-0.005mm |
| Ukuqina | Ngokubanzi i-HRC 61-67, ixhomekeke kwizinto eziphathekayo |
| Inkqubo yokudibanisa | I-Progressive Die |
| Isetyenziselwa | Nayiphi na iThebhulethi epheleleyo eCofa oomatshini abanodidi lwe-D lweSixhobo |
| Ubungakanani obuqhelekileyo | 12x15/25mm, 14x15/25mm, 18x18/25mm, 23x25mm |
| Iteknoloji | CAD, CAM, WEDM, CNC, Vacuum unyango ubushushu, Uvavanyo lwe-2.5-Dimensional (iprojekthi), umvavanyi wobunzima, njl.(HRC/HV) |
F-Head Six-Lobe Slot Titanium Plating Punch
Hexagonal Round Bar
I-P-Head ye-Six-Lobe Punch kunye ne-Black Titanium Plating
Six-Lobe Hexagonal Punch
Six-Lobe Punch
Six-Lobe tamper Punch
I-Six-Lobe Titanium Plating Punch
Nceda ukhankanye iinkcukacha ze-header punch ngolu hlobo lulandelayo xa ubuza okanye u-odola:
1. Izinto ezibhalwe ngentloko ngamanqindi ozifunayo okanye izinto zesikrufu ozisebenzisileyo;
2. Ukucaciswa komgangatho owusebenzisayo, imizekelo: JIS, ANSI okanye DIN;
3. I-Screw Application: I-Screw Machine , i-Tapping Screw, i-Wood Screw okanye nayiphi na enye;
4. Isitayela seNhloko: Intloko yeFlat , Intloko yePan , Intloko yeTruss , Intloko yokubopha okanye nayiphi na enye;
5. Ubungakanani begama: JIS-M20, M23;ANSI-#4, #8;I-DIN-M30, M35;
6. Recess Driver: Phillips , Slot, Phillips kunye Slot Combination, Pozi ect;
7. Ubungakanani : 12x25, 14x25, 18x25, 23x25;
8. Ifakwe i-Plian, i-TIN ifakwe, i-TILAN ifakwe.
IMIBUZO EQHELEKILEYO EKUSETYENZENI KWESIKREWU KUNYE NE-NUT MOLD:
I-1.Umsebenzi onobuchule unamava obumba kunye noyilo lwesakhiwo, ukuhlalutya isizathu sokusabalalisa okungenangqiqo kwi-die stress ratio kunye nokuguqulwa.
2.Ukucoceka kwesikhunta, ukugqitywa komngxuma wangaphakathi akwanele.
3.Ubulukhuni bemathiriyeli yomkhono weqokobhe, ukuxhathisa ubushushu, kunye nobulukhuni bonyango lobushushu abukho ngqiqweni.
4.Ukuze kugcinwe iindleko zemveliso, bakhethe umgangatho ompofu we-tungsten carbide steel kunye nentambo yocingo, ukucaciswa kwe-alloy kunye nezinto ezibiweyo ezibethelela amavili anzima azinangqiqo.
5.I-collider ayifanelekanga, ngaphandle kokutshintsha i-lubricants kunye nomatshini wokutshekisha ixesha elide.
6.Umsebenzi onobuchule wokulungelelanisa kufuneka abe nenqanaba eliphezulu lobugcisa.
