Thread Rolling Screw
-
Machine Screw Round Tail Thread Rolling Dies
The flat die system has two flat dies, one at the bottom is fixed, the other is slider. The blank is placed at one end of the fixed die, and then the moving die slides over the blank so that the blank rolls down from the fixed lower die to form the finished product. There are many kinds of flat die thread, such as ANSI, BS, DIN and JIS. It can offer or not hold angles. The flat die adopts the cold forming process to produce the external thread, and a fixed die and a moving die are used to form the external thread.
-
-
Inverted Spline Thread Rolling Dies
High Hardness Thread Forming Die Inverted Spline Thread Rolling Dies Plates with Good Price
Place of Origin:Dongguan, China
Brand Name:Nisun
Shaping Mode:Extrusion Mould,Preform Mould, Punching Mold
Product Material:VA80,VA90, KG6, KG5, ST7, ST6,CARBIDE
Size:003/0#/004/ 3/16/6R or according to client’s requirement
Product:Extrusion Mould
Product Name:Flat Thread rolling Dies
package:depends on request
Keyword:flat Thread rolling Dies
Application:For making screws thread
Package:Carton Package
Certificated:ISO9001:2015
-
Pineapple Flower P0.7 Thread Rolling Dies
Place of Origin:Dongguan, China
Brand Name:Nisun
Model Number:P0.7
Shaping Mode:Extrusion Mould,Preform Mould, Punching Mold
Product Material:VA80,VA90, KG6, KG5, ST7, ST6,CARBIDE
Size:003/0#/004/ 3/16/6R or according to client’s requirement
Product:Extrusion Mould
Product Name:Flat Thread rolling Dies
package:depends on request
Keyword:flat Thread rolling Dies
Application:For making screws thread
Package:Carton Package
Certificated:ISO9001:2015
-
M5-0.8 Machine Screw Thread Rolling Dies Plates
TOOLS AND ACCESSORIES ACCORDING TO THE FINISHED PRODUCT DRAWINGS
We are able to design tools and accessories according to the finished product drawings and technical requirements. It is necessary to specify the model of the machine, the material of the dies, the dimensions of the dies, the diameter of the wire, the dimensions of the product, the accuracy and pitch of the thread, the metric and inch specification of the thread, the shape of the outer surface of the dies (round, square, hexagonal, prismatic), the dimensions S, H, L1, L2 and the number of sets to be purchased.
-
M5-0.8 Thread Rolling Dies with a Groove
Place of Origin:Dongguan, China
Brand Name:Nisun
Shaping Mode:Extrusion Mould,Preform Mould, Punching Mold
Product Material:VA80,VA90, KG6, KG5, ST7, ST6,CARBIDE
Size:003/0#/004/ 3/16/6R or according to client’s requirement
Product:Extrusion Mould
Product Name:Flat Thread rolling Dies
package:depends on request
Keyword:flat Thread rolling Dies
Application:For making screws thread
Certificated:ISO9001:2015
